Straight-Edge Rulers 18" Long All straight edge rulers are in 1/16 inch increments on one side and 1/8 on the other.
Rulers are made of hardened, anodized aluminum. All markings are epoxy ink.
18" ruler is 1 1/8 wide x 1/8 thick.

The lines and numbers are molded into the ruler for perfect accuracy.
The original ruler designed by a quilter for the craft and quilting enthusiast. Designed with a little extra width and length needed when measuring and cutting borders. Ideal companion for the Rotary Cutter.

Simple and easy to use. One size multi-purpose ruler:
45° Bias measuring lines & 60° equilateral triangle lines 1/4” Gridded measurements throughout the ruler
1/2” Perpendicular lines

How to use with scissors:
Mark and cut a straight edge across the material Place desired width line on the straight edge Mark and cutting

Quilter’s Rule 6” x 45 Degrees Right Triangle Black
The Quilter’s Rule 6” Right Triangle is specially designed as an ideal measuring companion for use with a
rotary cutter. Simple and easy to use, this triangle is great for making 45 degree triangles and diamonds
from 1” to 12”.
Care of Ruler: Clean with soap and water or a non-ammonia glass or window cleaner.
How to Use:
1.) Using the base (the edge opposite of the 90 degree corner) of the Right Triangle, mark or cut with
a rotary cutter across your fabric for a straight edge.
2.) Simply slide the Right Triangle down from the mark or cut just made to the desired triangle size
and mark or cut along the two outside edges to complete your fabric triangle cutout.
For Right Angle Triangles on the Bias
Place the Right Triangle with the top 90 degree corner in the bottom left corner of your fabric. Mark or cut
the desired triangle size along each of the outside edges of the Right Triangle. Slide Right Triangle down
at a leftward angle so the base of the Right Triangle is at each of the marks or cuts just made. Mark or cut
along the base of the Right Triangle completing your fabric cutout,
For 45 Degree Diamonds
Fold your fabric in half. Using one of the 45 degree diamond corners of the Right Triangle, place the
desired diamond size on the fold of your fabric. Mark or cut along the two outside edges of the Right
Triangle. Unfold your fabric diamond cutout.

Quilter’s Rule 6” x 45 Degrees Right Triangle Teal
The Quilter’s Rule 6” Right Triangle is specially designed as an ideal measuring companion for use with a
rotary cutter. Simple and easy to use, this triangle is great for making 45 degree triangles and diamonds
from 1” to 12”.
Ca re of Ruler: Clean with soap and water or a non-ammonia glass or window cleaner.
How to Use:
1.) Using the base (the edge opposite of the 90 degree corner) of the Right Triangle, mark or cut with
a rotary cutter across your fabric for a straight edge.
2.) Simply slide the Right Triangle down from the mark or cut just made to the desired triangle size
and mark or cut along the two outside edges to complete your fabric triangle cutout.
For Right Angle Triangles on the Bias
Place the Right Triangle with the top 90 degree corner in the bottom left corner of your fabric. Mark or cut
the desired triangle size along each of the outside edges of the Right Triangle. Slide Right Triangle down
at a leftward angle so the base of the Right Triangle is at each of the marks or cuts just made. Mark or cut
along the base of the Right Triangle completing your fabric cutout,
For 45 Degree Diamonds
Fold your fabric in half. Using one of the 45 degree diamond corners of the Right Triangle, place the
desired diamond size on the fold of your fabric. Mark or cut along the two outside edges of the Right
Triangle. Unfold your fabric diamond cutout.

Quilter’s Rule 12” Right Triangle
The Quilter’s Rule 12” Right Triangle is specially designed as an ideal measuring companion for use with a
rotary cutter. Simple and easy to use, this triangle is great for making 45 degree triangles and diamonds
from 1” to 12”.
Care of Ruler: Clean with soap and water or a non-ammonia glass or window cleaner.
How to Use:
1.) Using the base (the edge opposite of the 90 degree corner) of the Right Triangle, mark or cut with
a rotary cutter across your fabric for a straight edge.
2.) Simply slide the Right Triangle down from the mark or cut just made to the desired triangle size
and mark or cut along the two outside edges to complete your fabric triangle cutout.
For Right Angle Triangles on the Bias
Place the Right Triangle with the top 90 degree corner in the bottom left corner of your fabric. Mark or cut
the desired triangle size along each of the outside edges of the Right Triangle. Slide Right Triangle down
at a leftward angle so the base of the Right Triangle is at each of the marks or cuts just made. Mark or cut
along the base of the Right Triangle completing your fabric cutout,
For 45 Degree Diamonds
Fold your fabric in half. Using one of the 45 degree diamond corners of the Right Triangle, place the
desired diamond size on the fold of your fabric. Mark or cut along the two outside edges of the Right
Triangle. Unfold your fabric diamond cutout.

Quilter’s Rule 12” x 45 Degrees Right Triangle Teal
The Quilter’s Rule 12” Right Triangle is specially designed as an ideal measuring companion for use with a
rotary cutter. Simple and easy to use, this triangle is great for making 45 degree triangles and diamonds
from 1” to 12”.
Care of Ruler: Clean with soap and water or a non-ammonia glass or window cleaner.
How to Use:
1.) Using the base (the edge opposite of the 90 degree corner) of the Right Triangle, mark or cut with
a rotary cutter across your fabric for a straight edge.
2.) Simply slide the Right Triangle down from the mark or cut just made to the desired triangle size
and mark or cut along the two outside edges to complete your fabric triangle cutout.
For Right Angle Triangles on the Bias
Place the Right Triangle with the top 90 degree corner in the bottom left corner of your fabric. Mark or cut
the desired triangle size along each of the outside edges of the Right Triangle. Slide Right Triangle down
at a leftward angle so the base of the Right Triangle is at each of the marks or cuts just made. Mark or cut
along the base of the Right Triangle completing your fabric cutout,
For 45 Degree Diamonds
Fold your fabric in half. Using one of the 45 degree diamond corners of the Right Triangle, place the
desired diamond size on the fold of your fabric. Mark or cut along the two outside edges of the Right
Triangle. Unfold your fabric diamond cutout.

16" Folding Square Ruler

Folding Square Ruler which was created from the idea of the old time framing square. You can square up corners, make triangles, bias strips, squares, and much more.  Lay the open folding easy square ruler on the straight edge of your fabric and the ruler will assist in squaring up your fabric for home decor sewing, crafting and quilting needs.

The unique folding action allows the ruler to complete a perfect right angle and to lay flat to a square

A Must for Home Decor Sewing and Quilting!  Print Folding Ruler Instructions

24" x 6" Square Folding Ruler

Folding Square Ruler which was created from the idea of the old time framing square. You can square up corners, make triangles, bias strips, squares, and much more.  Lay the open folding easy square ruler on the straight edge of your fabric and the ruler will assist in squaring up your fabric for home decor sewing, crafting and quilting needs.

The unique folding action allows the ruler to complete a perfect right angle and to lay flat to a square

A Must for Home Decor Sewing and Quilting!  Print Folding Ruler Instructions

COVID-19 Mask Tool  1/2 Inch Pleat tool

Make the perfect 1/2 inch pleats using the new easy quick pleater.  

Here are a few websites with FREE Instructions and downloads.

www.theStitchingScientist.com

Only 45 Singles Left and these are manufactured with Polycarbonate that will not chip, break or crack! 

Perfect for Home Dec sewing, Quilting, Heirloom and Apparel sewing.

Watch Pleater Video

Mini Kit includes 1/2 inch, 3/4 inch, 1 inch pleater tools..

Make the perfect 1/2 inch, 3/4 inch and 1 inch pleats using the new easy quick pleater. Perfect for Home Dec sewing, Quilting, Heirloom and Apparel sewing.

Watch Pleater Video

Quick Pleater Large Pleats Set Of 3- 2". 3" & 4" Pleaters

Large Kit includes 2 inch, 3 inch, 4 inch pleater tools.

 Make 2 Inch, 3 inch and 4 inch perfect pleats using the new easy Quick Pleater. Perfect for pillows, shams, bedskirts, slipcovers and pleated accents for home decor or apparel. Also seen on Sew4Home

 Download Free Instructions

How To Use Video

$10 Off Quick Pleater Bonus Set

Buy ALL 6  Save $10

Large Set Includes 2", 3", 4" Pleater Tools

 Make 2 Inch, 3 inch and 4 inch perfect pleats using the new easy Quick Pleater. Perfect for pillows, shams, bedskirts, slipcovers and pleated accents for home decor or apparel.

 Mini Kit includes 1/2 inch, 3/4 inch, 1 inch pleater tools

Make the perfect 1/2 inch, 3/4 inch and 1 inch pleats using the new easy quick pleater. Perfect for Home Dec sewing, Quilting, Heirloom and Apparel sewing.

Free Instructions

Use this neat and handy tool to make perfect mitered corners with no fuss and no lumpy binding end seams. 1/8in thick traditional thickness of “regular” rotary cutter rulers.

• Color: Clear
  
• Made of: Acrylic
  
• Size: 3.5in x 8.5in

   

This is a special tool designed to bring together the last two pieces of binding in a perfect mitered seam. No measuring and cutting and then trying to figure out how to join those last pieces! Follow the easy instructions printed on the tool and you will have a perfect ending every time.

Color: Clear

Mini Tapered Corner Pillow Template - Remove Dog Ears

NO More Dog Ear Pillows! Make perfect pillows, taper corners to prevent dog ears on your pillows. Lay edge to edge on fabric, trace or rotary cut to trim pillow before sewing.
Instructions:
1. Cut fabric to pillow size
Example: 20" pillow form, cut fabric 19" x 19"
(includes 1/2" seam allowances.
Finished Pillow = 18" x 18")
2. Lay both pieces on top of each other, right sides together.
3. In one corner, line up the template to the top of the fabric
with cut edges. (See Image 1)
4. Trace the curved corner, continue to trace all four corners.
5. Cut both layers of fabric on marked lines.
6. No More Dog Ears!

Guaranteed Not to Break Under Normal Wear