16" Folding Square Ruler

Folding Square Ruler which was created from the idea of the old time framing square. You can square up corners, make triangles, bias strips, squares, and much more.  Lay the open folding easy square ruler on the straight edge of your fabric and the ruler will assist in squaring up your fabric for home decor sewing, crafting and quilting needs.

The unique folding action allows the ruler to complete a perfect right angle and to lay flat to a square

A Must for Home Decor Sewing and Quilting!  Print Folding Ruler Instructions

24" x 6" Square Folding Ruler

Folding Square Ruler which was created from the idea of the old time framing square. You can square up corners, make triangles, bias strips, squares, and much more.  Lay the open folding easy square ruler on the straight edge of your fabric and the ruler will assist in squaring up your fabric for home decor sewing, crafting and quilting needs.

The unique folding action allows the ruler to complete a perfect right angle and to lay flat to a square

A Must for Home Decor Sewing and Quilting!  Print Folding Ruler Instructions

Quilters Rule Seam Guide

Perfect for small measurements, hems and all detail sewing projects. 

1" Wide by 7" Long

Injection molded of either Styrene or Acrylic, heat stamped, fabric gripping ruler.

The lines and numbers are molded into the ruler for perfect accuracy.
The original ruler designed by a quilter for the craft and quilting enthusiast. Designed with a little extra width and length needed when measuring and cutting borders. Ideal companion for the Rotary Cutter.

Simple and easy to use. One size multi-purpose ruler:
45° Bias measuring lines & 60° equilateral triangle lines 1/4” Gridded measurements throughout the ruler
1/2” Perpendicular lines

How to use with scissors:
Mark and cut a straight edge across the material Place desired width line on the straight edge Mark and cutting

Quilter’s Rule 6” x 45 Degrees Right Triangle Teal
The Quilter’s Rule 6” Right Triangle is specially designed as an ideal measuring companion for use with a
rotary cutter. Simple and easy to use, this triangle is great for making 45 degree triangles and diamonds
from 1” to 12”.
Ca re of Ruler: Clean with soap and water or a non-ammonia glass or window cleaner.
How to Use:
1.) Using the base (the edge opposite of the 90 degree corner) of the Right Triangle, mark or cut with
a rotary cutter across your fabric for a straight edge.
2.) Simply slide the Right Triangle down from the mark or cut just made to the desired triangle size
and mark or cut along the two outside edges to complete your fabric triangle cutout.
For Right Angle Triangles on the Bias
Place the Right Triangle with the top 90 degree corner in the bottom left corner of your fabric. Mark or cut
the desired triangle size along each of the outside edges of the Right Triangle. Slide Right Triangle down
at a leftward angle so the base of the Right Triangle is at each of the marks or cuts just made. Mark or cut
along the base of the Right Triangle completing your fabric cutout,
For 45 Degree Diamonds
Fold your fabric in half. Using one of the 45 degree diamond corners of the Right Triangle, place the
desired diamond size on the fold of your fabric. Mark or cut along the two outside edges of the Right
Triangle. Unfold your fabric diamond cutout.

Quilter’s Rule 6” x 45 Degrees Right Triangle Black
The Quilter’s Rule 6” Right Triangle is specially designed as an ideal measuring companion for use with a
rotary cutter. Simple and easy to use, this triangle is great for making 45 degree triangles and diamonds
from 1” to 12”.
Care of Ruler: Clean with soap and water or a non-ammonia glass or window cleaner.
How to Use:
1.) Using the base (the edge opposite of the 90 degree corner) of the Right Triangle, mark or cut with
a rotary cutter across your fabric for a straight edge.
2.) Simply slide the Right Triangle down from the mark or cut just made to the desired triangle size
and mark or cut along the two outside edges to complete your fabric triangle cutout.
For Right Angle Triangles on the Bias
Place the Right Triangle with the top 90 degree corner in the bottom left corner of your fabric. Mark or cut
the desired triangle size along each of the outside edges of the Right Triangle. Slide Right Triangle down
at a leftward angle so the base of the Right Triangle is at each of the marks or cuts just made. Mark or cut
along the base of the Right Triangle completing your fabric cutout,
For 45 Degree Diamonds
Fold your fabric in half. Using one of the 45 degree diamond corners of the Right Triangle, place the
desired diamond size on the fold of your fabric. Mark or cut along the two outside edges of the Right
Triangle. Unfold your fabric diamond cutout.

Quilter’s Rule 12” Right Triangle
The Quilter’s Rule 12” Right Triangle is specially designed as an ideal measuring companion for use with a
rotary cutter. Simple and easy to use, this triangle is great for making 45 degree triangles and diamonds
from 1” to 12”.
Care of Ruler: Clean with soap and water or a non-ammonia glass or window cleaner.
How to Use:
1.) Using the base (the edge opposite of the 90 degree corner) of the Right Triangle, mark or cut with
a rotary cutter across your fabric for a straight edge.
2.) Simply slide the Right Triangle down from the mark or cut just made to the desired triangle size
and mark or cut along the two outside edges to complete your fabric triangle cutout.
For Right Angle Triangles on the Bias
Place the Right Triangle with the top 90 degree corner in the bottom left corner of your fabric. Mark or cut
the desired triangle size along each of the outside edges of the Right Triangle. Slide Right Triangle down
at a leftward angle so the base of the Right Triangle is at each of the marks or cuts just made. Mark or cut
along the base of the Right Triangle completing your fabric cutout,
For 45 Degree Diamonds
Fold your fabric in half. Using one of the 45 degree diamond corners of the Right Triangle, place the
desired diamond size on the fold of your fabric. Mark or cut along the two outside edges of the Right
Triangle. Unfold your fabric diamond cutout.

Quilter’s Rule 12” x 45 Degrees Right Triangle Teal
The Quilter’s Rule 12” Right Triangle is specially designed as an ideal measuring companion for use with a
rotary cutter. Simple and easy to use, this triangle is great for making 45 degree triangles and diamonds
from 1” to 12”.
Care of Ruler: Clean with soap and water or a non-ammonia glass or window cleaner.
How to Use:
1.) Using the base (the edge opposite of the 90 degree corner) of the Right Triangle, mark or cut with
a rotary cutter across your fabric for a straight edge.
2.) Simply slide the Right Triangle down from the mark or cut just made to the desired triangle size
and mark or cut along the two outside edges to complete your fabric triangle cutout.
For Right Angle Triangles on the Bias
Place the Right Triangle with the top 90 degree corner in the bottom left corner of your fabric. Mark or cut
the desired triangle size along each of the outside edges of the Right Triangle. Slide Right Triangle down
at a leftward angle so the base of the Right Triangle is at each of the marks or cuts just made. Mark or cut
along the base of the Right Triangle completing your fabric cutout,
For 45 Degree Diamonds
Fold your fabric in half. Using one of the 45 degree diamond corners of the Right Triangle, place the
desired diamond size on the fold of your fabric. Mark or cut along the two outside edges of the Right
Triangle. Unfold your fabric diamond cutout.

Jumbo Wonder Clips! 2-1/4in long Made to hold bigger bindings easier! A great The Wonder Clips are a great alternative to pins, especially when working with heavyweight fabrics, piles and vinyls. It can hold layered sections of sewing projects such as handle connectors to handbags and piping without distortion. Holds quilt binding while sewing, and it's easy to see and easy to find when dropped on the floor! Works well with sergers. Great holding capacity, opens wide to hold many layers. Perfect for seam allowance markings.

Use this neat and handy tool to make perfect mitered corners with no fuss and no lumpy binding end seams. 1/8in thick traditional thickness of “regular” rotary cutter rulers.

• Color: Clear
  
• Made of: Acrylic
  
• Size: 3.5in x 8.5in

   

Hot Ruler Press Perfect Clover Needlecraft Inc.

Use the Hot Ruler to measure mark fold and press; deep hems long hems mitered corners. Perfect size rulers for large tasks at the pressing station. Keep this handy ruler by the iron to get the jobs you need done.

Roll & Press For Cork Fabric

Clover Needlecraft, Inc.

Convenient and quick to press seams. Won't pull stress or distort fabric. Wheel tapered to focus pressure on seam. Prevents seam impression on right side of project. Comfortable, ergonomic handle. Ideal for paper piecing or laminates. Use to seal glued seams on leather cork fabric and felt.

Quick and safe pick-up of small metal objects for your home, office or shop work.

For sewing needles, pins, paper clips, tacks, nails, bolts, screws, and more. 

When closed, the stiletto is "hidden" inside the handle. To use simply unscrew the top, remove the stiletto and screw it back into the top portion of the handle.

Size of stiletto is 6" when open and 4-3/4in when closed.

The stiletto helps to keep your seams accurate when your fingers won't let you

Use as a guide under the foot of your sewing machine.

Helpful for turning applique edges and more!

The brass stiletto can be used to guide fabric under the foot of your sewing machine, pick seams too small for standard seam rippers, turn applique edges and so much more. The brass stiletto is a must have for any quilter. Includes brass cap for safe storage with a ring so you can wear it on a chain or ribbon.

• Made of: Brass
  
• Use: Guide Fabric Under Needle / Pick Out Points / Remove Seams / Ironing
  
• Size: 3-3/4in Closed / 5-1/4in Open