Roman Shade Leveler Orbs: Bottom push slide cord leveler.
Greatest thing since sliced bread! Level your shades without tying knots.
New product can be used instead of snap ring.
Package of 10, 50 0r 100.

6 Colors 100 Yard Roll of Poly Cord.
White, Medium Grey, Tan, Dark Brown & Alabaster
Resists effects of sunlight better than nylons and mono-filament type cords.
All cords are braided to minimize stretch and reduce friction.
You may also use this cord for sewing micro cord when sewing window treatments.

1.8 mm has 155 lb. tensile strength

• 100 yard roll
  

 CLICK HERE for White 1.4 200 Yd Rolls

Lift Cord 1.4mm 6 Colors - 100 Yd Roll Or 1000 YD Roll of Poly Cord

Resists effects of sunlight better than nylons and mono-filament type cords.
All cords are braided to minimize stretch and reduce friction.
You may also use this cord for sewing micro cord when sewing window treatments.

1.4 mm has 90 lb. tensile strength
100 yard roll
White, Alabaster, Grey, Tan, Black, Dark Brown

.9mm 6 Colors - 100 Yd Roll Or 1000 YD Roll of Poly Cord

Not Recommend for our cord Locks CL11 or CL14.  We commend LC1.4mm or LC1.8mm when using Cord Locks.

Resists effects of sunlight better than nylons and mono-filament type cords.
All cords are braided to minimize stretch and reduce friction.
You may also use this cord for sewing micro cord when sewing window treatments.

9 mm has 90 lb. tensile strength
100 yard roll
White, Alabaster, Grey, Tan, Black, Dark Brown

Iron On Roman Shade Rib Tape

No Sew what of attaching our Roman Shade Ribs.  Twill Tape with adhesive on both edges  of the tape.  Once ironed to the fabric, it creates a channel for the plastic rib to be inserted.  The Roman Shade Ribs will stabilize your roman shades and allow them to raise and lower properly.

The shade rib tape can be ironed on with a standard home iron.

This tape makes it very easy to add rib support to per-existing shades.

• White or Natural
• Width: 1 inch
• 12 Yard Packages
• 72 Yard Roll
• Short rolls at a discount 

Nickel Plated Snap Rings

With a snap lock it is easy to gather small shade rings onto the metal snap ring.  Used for balloon shades, crafts,etc.

• 1"  Inside Diameter 1 1/4" Outside Diameter
• 3/4" Inside Diameter 7/8" Outside Diameter
• 10 or 100 per package

• Small will hold 2 to 6 shade rings, Approximate size: 1/2" ID 3/4" OD

• Large will hold up to 12 shade rings. Approximate size: 3/4" ID  1 1/4" OD

Used for gathering rings on back of pouffes treatments, balloon, Austrian valances, London shades and more.

• Balloon Window Treatments
• Pouffe Window Treatments
• Austrian Valances
• White has better resistance to sun than the clear

Plastic Split Rings for Window Treatments Pkg 25 Gather shade rings

• Small will hold 2 to 6 shade rings, Approximate size: 1/2" ID 3/4" OD
• Large will hold up to 12 shade rings. Approximate size: 3/4" ID  1 1/4" OD

Used for gathering rings on back of pouffes treatments, balloon, Austrian valances, London shades and more.

• Balloon Window Treatments
• Pouffe Window Treatments
• Austrian Valances

WILL LAST FOREVER™ NEVER REPLACE SHADE RINGS AGAIN!

Our Clear ForeverRing outshines all other rings because it will never yellow, crack, split or break, and is guaranteed for the life of your window treatment. The flawless clarity of our ƒCrystal ClearForever™ design replaces your need for assorted ring colors such as white, tan or brown, and blends seamlessly into the backside of your shade or woven woods. Use the Clear Forever™  Ring for highest quality, most beautiful design and performance you can count on.

With our guarantees to appear virtually invisible, perform again and again, remain  Crystal Clear,and to meet your quality expectations, you can rely on the Clear Forever Ring to last. Never service a broken or splitting ring again. Better yet, never worry about hazardous loops created from a broken ring or splitting ring again. That  fashion, function, safety and value you can trust.

Features and Benefits

• Guaranteed performance for the life of the window treatment
• Made from a unique, proprietary blend of certified pure materials
• Patent pending design was developed specifically for window covering usage
• Quality assurance guaranteed
• 100% of ClearForever Rings are made in America

Sew On Clear Plastic Rings, 50 Pack

• UV Stable will not become brittle and break from sun exposure. Sometimes referred to as the bone ring.
• Will not melt even if touched by a hot iron.
• High abrasion resistance.
• Suitable for fabric shades, tie backs, etc.

Diameter: 3/8 inches Inside Diameter - 5/ 8 inches Outside Diameter.

• UV Stable will not become brittle and break from sun exposure. Sometimes referred to as the bone ring.
• Will not melt even if touched by a hot iron.
• High abrasion resistance.
• Suitable for fabric shades, tie backs, etc.

Roman Shade Nickel Sew on Rings  3/8" Diameter

• 50 package 

• 1000 package

Roman Shade White Enamel l Sew on Rings  3/8" Diameter

• 50 package 
• 500 package
• 1000 package

Ring Locks for Child Safe Shades

The New Ring Lock goes on each ring to prevent lift cord from being pulled too far out and forming a hazardous loop. The Ring Lock takes the cost of cording a shade back down toward the very low cost it was 2 years ago behind: a single 1.4mm cord, NO MORE multiple shrouded or ladder cords, Ring Locks and only Two minutes labor.
You can use with Forever rings or our plastic rings.

Width: 3/8" Length: 7/8" Depth: 3/8"
Order Today! 25, 50 or 100

Level Lock  Roman Shades

DOES NOT INCLUDE RING LOCK

The new clear Level Lock® Insert used, with our Ring Lock®, is our solution for dissatisfied “orb” users across the country. It functions better than an orb, costs less than orb, and looks better than an orb! Unlike obtrusive orbs, the clear Level Lock® Insert levels every shade while essentially disappearing into the back of the window treatment. Let your shades shine without distracting pieces or malfunctions. Our clear Level Locks® Insert adjust easily and snap into place for all types of users so that you never have to worry about an exploding orb spring again.

With 4x the strength of an orb, use clear Level Locks® Insert to reduce call backs for servicing on broken orbs that only hold up to 2.5 lbs. Clear Level Locks® Insert are guaranteed to hold a remarkable 10 lbs. per cord column requiring a tremendous amount of force or pressure to make your shades appear uneven.
Features & Benefits

Manufactured to never yellow, chip, crack or break
4x stronger than orbs for strength you can depend on
33% cheaper than orbs

DOES NOT INCLUDE RING LOCK

Guaranteed safety for the life of the window treatment when used with other components of the ProLift® Professional Lift System
100% Made in America
Protected by Patent No. 8,540,006 along with other multiple patents pending

Ladder Tape For Shades

Ladder tap[e is easy to add to the shade and stacks up nicely.
You tack it at each ring (and for lighter weight shades you could omit rings) and then weave the lift cord through the "ladder".
You can use any size shade lift cord with the Ladder tape

The spacing has to meet cord safety standards of course. (suggested 8 inch spacing)

You can stop the ladder tape at the uppermost ring. I tie it off to the top and bottom rings.

A large upholstery needle makes threading the shade cord through the ladder tape easier.

White Spooled Ladder Tape

30 Ft Roll 1/4" wide and 5/8" approximate spacing.

150 Ft Roll 1/4" wide and 5/8" approximate spacing.

1000 Ft Roll- 1/4" wide and 5/8" approximate spacing.

Roman Shade Ladder Tape complies with fabricating Safe shade products.

Custom Shades Level 1 at Workroom Tech 

Safety Warning Tag - Tension Device

Compliant with the new ''American National Standard for Safety of Corded Window Covering Products''.
According to the new ANSI standard, one of these tags is required on ALL window treatments with cord or bead chain.
White Vellum tag stock with printing on both sides.
Front side English; Backside Spanish.
Each tag features the ''WARNING'' in large black letters with a highly visible safety orange background.
Pre-punched hole with slit at the top for quick and easy installation.
Size: 5 1/2" x 2 3/4''.

Safety Warning Tag - Accessible Operating Cord

Compliant with new ''American National Standard for Safety of Corded Window Covering Products'' which requires one of these tags on ALL window treatments with accessible operating cords.
White label in English on one side and Spanish on reverse.
Each label features large black letters with highly visible safety orange.
Top hole and slit for quick and easy installation.
Size: 2 3/4" X 5 1/2".

Translucent Shirring Ring Tape for Austrian Shades

Clear Translucent tape 1" wide and 10" ring spacing can be used for sheer shades or when making Austrian shades or Austrian curtains. 

Sold by the yard or  by the roll (72yd roll)

The translucent Roman shade tape can be used to make flat Roman, London, balloon, fantail, hobbled shades etc. The translucent Austrian shade tape is for making Austrian shades, Austrian valences etc. Ideal choices for sheer fabrics and are also less noticeable if used with any other fabrics.

However, these tapes are not intended for heavy shades.

3/16" x 5' Roman Shade Ribs Off White

Ships By FedEx Only  The ribs will be drop shipped by our supplier

Download our new NO RIBS METHOD with Buckram 

3/16" diameter, 5 ft. long with center hole which allows splicing of pieces to accommodate wider shades and to eliminate scrap.

Also used on Hobbled Shades at the ring stitches to help keep the folds straight.

Save money by splicing the ribs together.  Roman shade Splices

Download Free No Sew Shade Instructions

• 20 Pack
  
• 100 Pack

 PLEASE NOTE:  UPS and FedEX rates are SURCHARGED $50, due to oversized lengths of 60".  This is in addition to the typical shipping rate for distance and weight.

Shade Ribs 1/4" by 5' 

SHIPS BY FEDEX ONLY

Download our new NO RIBS METHOD with Buckram

Description: Rigid plastic. Supports pleats on Roman Shades when placed in a small tuck or use Iron On Rib tape to make the pocket on the back or front of the shade.

1/4" diameter, 5 ft. long with center hole which allows splicing of pieces to accommodate wider shades and to eliminate scrap.
Also used on Hobbled Shades at the ring stitches to help keep the folds straight.

Sold :

• 20 pack
  
• 100 pack

• Save money by splicing the ribs together.  Roman shade Splices
• Download Free No Sew Shade Instructions

PLEASE NOTE:  UPS and FedEX rates are SURCHARGED $50, due to oversized lengths of 60".  This is in addition to the typical shipping rate for distance and weight.

Feel Free to call Claudia for shipping Quote

Wood Tassels - Package of 4

The wood tassel is used to raise and lower shades, you can use to to condense the cords to a single cord and use as a tassel.

Great for shade and fan pulls as well.
Just add a little glue to the knot to prevent the knot from coming untied or slipping out.

4 Shapes
Bell, Round, Vase and Large Hourglass

4 Colors
Alabaster, Pecan, Walnut,

Gutermann Upholstery thread

Gutermann Upholstery thread is extremely high strength. It can be used on leather, vinyl coated fabrics, denim, canvas, and carpet materials. Soft and flexible ensuring neat, flat seams. No strength loss due to washing or dry cleaning. 100% Polyester. 328 yards 

Upholstery thread can be used for:

• Button on Bolsters
• Sewing Rings on Roman Shades
• Outdoor Fabrics (Sunbrella)
• Window Treatments

Translucent Ring Tape for Roman & Hobbled Shades

Clear Translucent tape 1" wide and 5" ring spacing can be used for sheer shades or when making hobbled or light weight shades.

Sold by the yard or by the roll (72yd roll)

The translucent Roman shade tape can be used to make flat Roman, London, balloon, fantail, hobbled shades etc.

However, these tapes are not intended for heavy shades.

Iron On Transparent Buckram by Dofix

Use with the Buckram-Fold, Blackout Roman Shade Method

Available Now!

• 3" Wide
• 4" Wide

• 10 Yard Roll
  
• 110 Yard Roll

Free Instructions by Susan Woodcock of Workroom Tech

Blackout Buckram Fold Roman Shade Instructions

Iron On Buckram Fold Interlined Roman Shade Instructions

TECHNICAL TIPS

Dofix tapes require a minimum temperature of 212 degrees to liquid the iron-on adhesive.  The iron must have a continuous flow of stem.  This is typically achieved most efficiently with a commercial boiler type of iron.  

The larger output of steam is, the shorter the application time will be.

The more absorbent a fabric is, the stronger the bond will be.

Non absorbent fabrics e.g. shower curtain or outdoor fabrics can not be bonded permanently.

The steam of the iron will transport the heat through the layers of the fabric to the adhesive.  Once adhesive becomes hot it turns liquid.  The hotter the adhesive, the more liquid it becomes.

The fabrics can absorb the liquid adhesive then pressing them with the iron.  Once the adhesive cools down again, it becomes solid and the layers are bonded.

Application:

Place the iron over the tape, lining or interfacing that is to be bonded.  Set iron to release steam continuously down.  A contact time of 1-2 seconds is typically sufficient to liquefy the adhesive.  However this is strongly dependent on the temperature of the iron/steam, the quantity of steam and the thickness of the density of the fabrics that are being bonded.

Be sure to cover the entire surface of the tape or lining that is to be bonded with the area of the iron where the steam exits from it.  Keep in mind that the adhesive will only be liquefied properly in this area. On most irons this is at the very tip of the iron, not the entire surface of it.

Press the iron slightly day to push the liquid adhesive into the fibers of the fabrics.  Move the iron in small steps lifting is somewhat in between to avoid stretching the fabric or creating wrinkles.

To avoid a separation of bonded materials, do not move or pull on the fabrics while the adhesive is still hot. 

Separating bonded materials:

Previously bonded fabrics can be separated by simply reheating the adhesive.  It will liquefy again and the layers can be separated while the adhesive is hot.

Many of our clients also us the Velocity 200IR Steam Iron

Iron On Crinoline (Buckram) by Dofix

Use with the Buckram-Fold, Interlined Roman Shade Method

Available Now!

• 3" Wide
• 4" Wide

• 10 Yard Roll
  
• 110 Yard Roll
• assorted short cuts

Free Instructions by Susan Woodcock of Workroom Tech

Blackout Buckram Fold Roman Shade Instructions

Iron On Buckram Fold Interlined Roman Shade Instructions

TECHNICAL TIPS

Dofix tapes require a minimum temperature of 212 degrees to liquid the iron-on adhesive.  The iron must have a continuous flow of stem.  This is typically achieved most efficiently with a commercial boiler type of iron.  

The larger output of steam is, the shorter the application time will be.

The more absorbent a fabric is, the stronger the bond will be.

Non absorbent fabrics e.g. shower curtain or outdoor fabrics can not be bonded permanently.

The steam of the iron will transport the heat through the layers of the fabric to the adhesive.  Once adhesive becomes hot it turns liquid.  The hotter the adhesive, the more liquid it becomes.

The fabrics can absorb the liquid adhesive then pressing them with the iron.  Once the adhesive cools down again, it becomes solid and the layers are bonded.

Application:

Place the iron over the tape, lining or interfacing that is to be bonded.  Set iron to  release steam continuously down.  A contact time of 1-2 seconds is typically sufficient to liquefy the adhesive.  However this is strongly dependent on the temperature of the iron/steam, the quantity of steam and the thickness of the density of the fabrics that are being bonded.

Be sure to cover the entire surface of the tape or lining that is to be bonded with the area of the iron where the steam exits from it.  Keep in mind that the adhesive will only be liquefied properly in this area. On most irons this is at the very tip of the iron, not the entire surface of it.

Press the iron slightly day to push the liquid adhesive into the fibers of the fabrics.  Move the iron in small steps lifting is somewhat in between to avoid stretching the fabric or creating wrinkles.

To avoid a separation of bonded materials, do not move or pull on the fabrics while the adhesive is still hot. 

Separating bonded materials:

Previously bonded fabrics can be separated by simply reheating the adhesive.  It will liquefy again and the layers can be separated while the adhesive is hot.

Many of our clients also us the Velocity 200IR Steam Iron

Iron On Blackout Tape by Dofix

Use with the Buckram-Fold, Blackout Roman Shade Method

Available Now!

• By The Yard 
• 55 Yard Roll

Download Free Instructions by Susan Woodcock of Workroom Tech

Blackout Buckram Fold Roman Shade Instructions

Iron On Buckram Fold Interlined Roman Shade Instructions

TECHNICAL TIPS

Dofix tapes require a minimum temperature of 212 degrees to liquid the iron-on adhesive.  The iron must have a continuous flow of stem.  This is typically achieved most efficiently with a commercial boiler type of iron.  

The larger output of steam is, the shorter the application time will be.

The more absorbent a fabric is, the stronger the bond will be.

Non absorbent fabrics e.g. shower curtain or outdoor fabrics can not be bonded permanently.

The steam of the iron will transport the heat through the layers of the fabric to the adhesive.  Once adhesive becomes hot it turns liquid.  The hotter the adhesive, the more liquid it becomes.

The fabrics can absorb the liquid adhesive then pressing them with the iron.  Once the adhesive cools down again, it becomes solid and the layers are bonded.

Application:

Place the iron over the tape, lining or interfacing that is to be bonded.  Set iron to release steam continuously down.  A contact time of 1-2 seconds is typically sufficient to liquefy the adhesive.  However this is strongly dependent on the temperature of the iron/steam, the quantity of steam and the thickness of the density of the fabrics that are being bonded.

Be sure to cover the entire surface of the tape or lining that is to be bonded with the area of the iron where the steam exits from it.  Keep in mind that the adhesive will only be liquefied properly in this area. On most irons this is at the very tip of the iron, not the entire surface of it.

Press the iron slightly day to push the liquid adhesive into the fibers of the fabrics.  Move the iron in small steps lifting is somewhat in between to avoid stretching the fabric or creating wrinkles.

To avoid a separation of bonded materials, do not move or pull on the fabrics while the adhesive is still hot. 

Separating bonded materials:

Previously bonded fabrics can be separated by simply reheating the adhesive.  It will liquefy again and the layers can be separated while the adhesive is hot.

Many of our clients also us the Velocity 200IR Steam Iron